Floor tile installation standard used to be a more complicated process than it is today. Today, tile makers have made great strides in keeping it simple. The first step is preparation. Once the old floor was removed, make sure you have a clean surface to work with. Request a good quality cleaner for this purpose from a hardware store. You can also call a professional for your wall and floor tiling in Perth via Gun Tiling
Use the coarse cloth and clean the entire surface to be tiled. Spend some time with this. You want to make sure to get rid of any traces of old adhesive, oil, grease, and dirt. Now find out what is going on your patterns. Most of the roof box will contain samples in the pattern. Choose the one that suits you.
Next, determine where the exact center of the floor is. Finding the center at each point well and mark it. Then run the chalk line from one wall to the one opposite it and snap on the floor. Do the same for the other two opposite walls. The point where the lines intersect is the center point you. where you will begin the process of tiling. The idea is to lay tile from the center and moving outward toward the wall.
Now run loose tiles line from one wall to the one opposite it. Then do it in the opposite direction. The goal is to see exactly how many tiles will fit in the room, and then, when you do not have space for all the other tiles, figuring out how many inches remain. You will need to cut partial tiles to fill the vacant niches.